FamilyOTC Health and Beauty Products

Bonus Pack 15 Fl. Oz.
Includes Travel Size & Lens Case

Cleans, Disinfects & Moisturizes in 5 Minutes

Ideal for Silicone Hydrogel Lenses
• Cleanse
• Rinses
• Disinfects
• Stores for Soft (Hydrophilic) Contact Lenses

Includes:
• 12 fl. oz. (355 ml)
• 3 fl. oz. (90 ml)
• Pro-Guard Lens Case

AQuify MPS contains the unique moisturizing agent, dexpanthenol, which locks in moisture and helps keep lenses from drying.

Some multi-purpose solutions require you to take your lenses out and soak them for 4-6 hours. Rub and rinse your lenses with AQuify MPS anytime and they are ready to wear again after soaking in AQuify® MPS for just 5 minutes.

Data indicate that lens cases are a significant source of microbial contamination. The Pro-Guard lens case is specially formulated to reduce contamination on the lens case surface.

The Pro-Guard lens case should not be used by persons who are allergic to silver or other metals, such as nickel.

AQuify Multi-Purpose Solution (MPS) is for cleaning, rinsing, disinfecting and storing soft (hydrophilic) lenses, including silicone hydrogel lenses, as recommended by your eye care professional. AQuify MPS is also indicated for daily protein removal when lenses are soaked for at least 4 hours.

Contents:
AQuify MPS is a sterile aqueous solution containing sorbitol, tromethamine, pluronic F127, sodium phosphate digudrogen, dexpanthenol, edetate disodium dihydrate and preserved with polyhexanide 0.0001%

For more information consult your eye care professional, or contact: Ciba Vision 1-800-986-3001

The Pro-Guard lens case is a contact lens storage case that is infused with silver ions to help minimize contamination on the lens case surface.

Made in Canada

To assure proper disinfection of your lenses you must follow the instructions completely. Do not skip any steps. 1. Wash and rinse your hands and dry with a clean, lint-free towel before handling your lenses. 2. Apply at least 3 drops of AQuify MPS on each side of the lens and gently rub the lens for at least 10 seconds. 3. Rinse both sides of the lens with AQuify MPS for a total time of at least 10 seconds. 4. Place the lens in the empty Pro-Guard lens case and fill to the line with fresh AQuify MPS making sure to cover the lens. Repeat the above procedure with the second lens. Replace caps and screw closed. 5. Allow your lenses to soak for at least 5 minutes to overnight. For protein removal, soak for at least 4 hours. After soaking, lenses are ready to use. If needed, fresh AQuify MPS maybe used to rinse lenses prior to insertion. 6. Always empty your Pro-Guard lens case and discard used solution after each disinfection cycle. Then rinse your Pro-Guard lens case and discard used solution after each disinfection cycle. Then rinse your Pro-Guard® lens case with fresh AQuify MPS and recap.

AQuify MPS is a sterile aqueous solution containing sorbitol, tromethamine, pluronic F127, sodium phosphate digudrogen, dexpanthenol, edetate disodium dihydrate and preserved with polyhexanide 0.0001%